Boyar & Schultz 0 LT Box Tool Holder. Has 3/4" Shank And Is In Really Good Condition As Shown In Pictures. We Priced This For Less Than eBay Models.
Insert box tools are used in the turrets of screw machines, turret lathes,and CNC lathes for taking extra-heavy, rapid cuts in workpieces.Using triangular carbide throw-away inserts, downtime for tool bit sharpening is eliminated.You get a higher production rate at the lowest cost per cutting edge by removing stock 30% to50% faster than with conventional cutters.The triangular carbide insert can be changed from one edge to another in less than a minute.Centerline is maintained when replacing the insert. Chips are controlled at any speed or feed rate ormaterial by a built-in molded chip breaker.Extra-high roller blocks are available to provide support on the unfinished diameter of the workpiece.Carbide rollers and pins are available for extended wear.Standard carbide inserts have a 1/64" radius on corners; inserts with 1/32" radius are available and must be used with rollers that have a 1/64" chamfer.